To go to the site where construction work was electricity, electrical wiring paves the interim, until it will change the old to the new. At the site, as a rule, electrician services are offered first, because without light, and the case will go no farther, not equipment, not the world will not.
The work is an electrician that would change all the old wires, plugs, connectors and much more on new, modern, under the European standard. However, these are the same and other electrical work in gofrukafe, being posted on the floor, walls and ceiling. What would be correct to produce electrical work, the specialist chooses a certain type of cable and distributes the load to all outlets and switches are. Laying the wiring must be strictly poperpendikulyarno plane and not in any way cross diagonally, it is necessary so that when finishing work not accidentally get into the wire fixing materials.
Once plastered walls, you can begin assembling podrozetnikov. Once when the wall is completely finished, in terms of finishing, you can make installation fittings sockets and switches. When the final touches of paint work done, the case raises for the electricians, they begin to set caps on the outlets and switches, attach the decorative borders.
In order to be in a box with fuses, not who is not climbed, its special decorative body mounted flush and immured in the wall.
Modern technology in the telephone network and the Internet is evolving so fast that they can not keep up. So when you choose cable to connect the Internet or a landline phone, choose a more modern design. Since they determine the quality of the connection, so forestalling action, because every day something new invented for computer connection required eight-wire cable.
All power, primarily requires foresight and vision to the front. Since we must take into account is the fact that the installation of TV cable, you need to pay attention to the fact that there is an additional TV or cable, for such television need a separate cable and the best way to do it for repair, but not after it.
Before you remove the wiring in the wall, they are tested for safety. It is very popular in projects to repair use “zakarnizny light” or “portal light” with incandescent lamps. But this is not the most cost-effective solution, because eventually the ceiling is formed yellow spot, from which radiates heat lamp, and the electricity it consumes a great deal.
Another drawback of incandescent lamps is the fact that such small bulbs validity than that of ordinary bulbs. So when it burn out, it has to be changed, but it’s not the worst thing, an unpleasant fact that the hole where the bulb is mounted too low and are certainly not without cracks. And you will again need to do cosmetic repairs, this part of the ceiling, and it must agree not cheap.
Of course, you can put fluorescent lamps, but replacing the lamp with the combustion remains the same. Have these lamps as well and the benefits they are three times less power consumption and less warm. But these lamps are satisfied with only part of buyers, since such lamps emit light not alive.
There are neon lamps, but they are intended as a “fine” jewelry and lighting, for example, for the kitchen.
Also there is another type of lamp – Halogen. They also have their drawbacks, as for their use need a special transformer. This device is mounted in the ceiling. Now, imagine if something burned out and must be replaced, there will be very great difficulties.
So, before you choose a lighting device, evaluate the ease of use.
If the house is very much technology, then make a separate transformer for bathrooms.