Fig1. Cut pipe perpendicular to its axis by means of PEX pipe cutter or hacksaw.
Fig.2 Remove the inner chamfer pipe with a knife, remove all external burrs.
Fig.3. Remove the outer crimp clamp, removing the bolt and extending it with pliers.
Fig.4. Install the bolt head between the strap and remove the crimp clamp from the connection.
Fig.5. Put the crimp clamp on the pipe, then pipe in the pipe with male thread.
Fig.6. Install crimp clamp so that the serving on it groove came the groove pipe with male thread.
Fig.7. Insert the bolt into place, put on a washer and nut.
Fig.8. Tighten the bolt connection with the keys, while clamping plate crimp clamp does not touch each other.