* Cut PEX pipe perpendicular to its axis, leaving no burrs
* Wear crimp nut and locking the cutting ring on the end of the PEX pipe
* Insert the PEX tube inside the sleeve, it should go there all the way
* Crimp tool attached to the outer thread of responses and manually turn until it stops.

Then with a wrench it fix about 1,5-2 turnover.

In the compounds of this type, with the original elements of Uponor Wirsbo PEX, sealing is carried out by contact of metal surfaces (metal – metal) without the use of rubber seals. In this connection, the connection will always be sealed regardless of the temperature and duration of operation.

In compounds of another type, with rubber sealing elements, sealing depends on the life of seals.

At high temperatures, water (coolant), a hot water supply systems, or PEX heat transfer plate PEX radiant heating, the service life of these spacers is about 5 years.

Installation of the system is quick and easy, requires no special expensive tools and executed without gluing soldering and threading.

Connection is very simple and reliable. At the critical tensile loads, broken pipe, and the connection remains tight and is not destroyed.

Connection types Quick & Easy applies to installation of PEX pipe: Ø16-40 mm. In water supply systems – Uponor Wirsbo-PEX (operating temperature 95 ° C and pressure of 6 and 10 atm.), And PEX heat transfer plate PEX radiant heating systems – evalPEX (operating temperature 95 ° C and pressure of 6 and 10 atm.).

Quick & Easy Connection can be performed at subzero temperatures (-15 ° C).

In the technology Quick & Easy can be used only original pipe, ferrule, coupling elements and the expansion tool Swedish concern Uponor Wirsbo.

Connections samoobzhimnye Uponor Wirsbo Quick & Easy Master, based on the use of PEX fittings, Polysulfone PSU.