Nowadays, most people or even plumbers consider copper piping for plumbing. Copper is a fine metal but by researching on this subject deeply, you will find that copper can leak during extremely cold temperature. It is true that copper or brass pipes are used widely for water distribution but if you want to get safe, reliable and clean plumbing, you can consider PEX piping for your home. The best part of PEX is that it is non toxic and prevents the formation of minerals inside. It is due to its smooth interior and fine material. It is also used widely for radiant floor heating and snow melting.

PEX plumbing is gaining great attention among home owners due to its great flexibility and durability. It is strong plastic which cannot reshape and does not melt. It is true that copper is also reliable but PEX has more advantages over copper. Copper is a rigid metal but PEX is rigid and corrosion resistant. Nowadays, there are several applications where PEX is widely used due to its incredible and advantageous features. PEX is a perfect material especially for the countries where temperature remains cold throughout the year. In such countries, copper pipes cannot be used for plumbing applications as there are chances of frost cracking. On the other hand, PEX has the ability to withstand even minus 200 degrees F of temperature.

In order to drill holes on PEX tubing, it is essential to use PEX tools which are easily available in the market. These tools are especially crafted for PEX tubing. The cutting of PEX needs perfection as even a minute mistake in the cutting can result in water leakage. It is always suggested to hire a professional if you do not have any experience of handling PEX tube. So, whether you want to do it yourself or want to hire professionals, always make sure to check the usage of professional tools and you can get the best quality from PEX Universe.

Dream designer!

Most built-in floor heaters used for heating houses, rarely – in the heating of urban residences. For the first time entering the field of view of the buyer in the store or on the construction market, such a device is usually perceived as a long low box, which has a lid in the form of decorative lattice. Under the grate, in the case (it is called gutter), installed heating air heat exchanger (pex tubing with a on her heat transfer plates), which is connected to the heating system – from contact with it rises the air temperature in the room. In addition to the heat exchanger in the gutter of the convector can be located with a small fan motors (one or several) to expedite heating facilities by intensive blowing the heat exchanger, as well as various regulating devices.

During installation of the shell embedded convectors hide in the floor construction. They are immersed in the cement screed (“give the sediment) or installed in the openings, arranged in raised floor. After laying the floor covering will remain visible only decorative grilles, flush with clean disposable surface. The uninitiated person entering the room, heated recessed convectors are unlikely to immediately determine where is the heat – is it really from the narrow “carpet tracks, spread out under the windows? ..

Designers find embedded in the floor convectors so longed embodiment of a battery of invisibility. And all because of the built-in heaters are able to organically blend with almost any decor.

Color grid embedded in the floor convectors can be adjusted to the color of the floor covering or other important elements of interior decoration at home: upholstery, curtains, wallpaper and color, etc. Fortunately, most manufacturers of convectors offer enough rich palette of shades of color possible lattices. Grids are usually made of aluminum (without finishing, anodized, or coated with a polymer coating), precious woods (oak, beech, mahogany, walnut, birch less) or plastic. Beam, which comprise the grille may be placed across the trench convector – a product similar to the ladder and is flexible (it is easy to roll up into the bay, which is useful, for example, when cleaning the room). Along the trough are the rungs of hard and semi-rigid aluminum grids (in the last line elements are fastened together with special flexible springs that allow strictly adhere to its size and not burden the design).

Serial heaters are in terms of a rectangular shape, their dimensions once and forever defined by the manufacturer. Thus, the width of the gratings is 140-430 mm, length – 800-5000 mm. But if the standard rectangular shape and dimensions of devices for some reason you are not satisfied, you can order a suitable option for specific space. ” Theoretically, recessed convectors can have unlimited length and curved shape. It is proposed to connect grids into their heads in the corners of the room (the corner of their joints from some manufacturers is only 90 °, while the other is in the range from 0 to 180 °). Convector can repeat the contours of the curved sections of walls (for example, in the bay), walk round columns, etc. To order grids with metal inserts, fixtures, electrical outlets and other embedded equipment.
From the standpoint of Thermophysics recessed into the floor convectors good. With a minimum amount contained in their heat exchangers of hot water they instantly respond to changing needs in the warmth of the room, providing a high level of comfort and savings on heating.

In qualitative convectors lattice heated to no more than 40-45 ° C, even if the coolant temperature is high enough. Consequently, prolonged contact with their surface can not get a burn. However, walking barefoot on the grating is still not recommended. Interior items, including leather sofas, chairs, antique wooden furniture and modern electrical equipment can often be located in close proximity to the convector without risk of damage. Passing through the device the air comes into contact only with small areas become extremely hot tube heat exchanger, a total area of 3,5-5% of the total area of heating, the plate markedly colder. Moreover, even at the maximum coolant temperature surface heat exchanger has a temperature of about 60 ° C, which virtually eliminates the sticking of dust and reduces (compared with other types of heaters) positive ionization of the air that adversely affects the health and well-being.

Drainage is an extensive system of interconnected tubes located around or along the protected from moisture built. The incoming water flowing on the ground. Each tube (experts call it drains) is on the walls of a network of holes (perforations). They are at some distance from each other.

PEX drainage tubing – corrugated, perforated, and without, equipped with ribs, as well as the filter of the geotextile or without him.

Depth favorite PEX drainage tubing does not exceed 3m.

Lifetime drainage from polymers -50 years or more. Produced samples with a diameter of 50-200 mm, the most effective and popular in cottage construction – 100-millimeter.

Drainage can be laid both before and after waterproofing the basement and the basement, but strictly to the general backfilling outside the foundation.
Drainage tubing without winding

Holes for water flow (with a standard width of cut 1.3 mm) are protected, because there are depressions in the waves
This tube can be supplied without holes

Features:

* Depth of laying tubing from 1,5 to 3,5 m.
* tubing length 50,0 m
* tubing diameter from 50 to 200 mm

Scope:

* Removal of groundwater in the private construction
* The diversion of groundwater in industrial buildings, parking, shopping centers, etc.

Culvert in the winding of geopolotna

Holes for water flow (with a standard width of cut 1.3 mm) are protected, because there are in the hollows of the waves.

Geotextiles used to protect the drainage tubing from the infiltration of small soil particles.
Features:

* Depth of laying tubing from 1,5 to 3,5 m.
* tubing length 50,0 m
* Diameter tubing from 50 to 200 mm

Scope:

* Removal of groundwater in the private construction
* Removal of groundwater in residential and industrial buildings, parking, shopping centers, etc.

Drain tubing in coconut winding

Holes for water flow (with a standard width of cut 1.3 mm) are protected, because there are in the hollows of the waves.

Coconut fiber is used to protect the drainage tubing from the infiltration of small soil particles.
Features:

* Depth of laying tubing from 1,5 to 3,5 m.
* tubing length 50,0 m
* Diameter tubing from 50 to 200 mm

Scope:

* Removal of groundwater in the private construction
* Removal of groundwater in residential and industrial buildings, parking, shopping centers, etc.

Double-layer structure of the protective tubing for cable (outer layer – corrugated PEX, internal – smooth CVP) allows, in combination with low weight and high resistance to external force loads easily and effortlessly extend inside the cable. Laying can be performed both summer and winter at ambient temperatures not below -27 ° C. Operating temperature protective double-walled tubes from -40 ° C to +90 ° C.

The benefits of using protective double-walled tubing PEX/ LDPE cable

* Protection from vibration, thermal, mechanical and chemical influences
* Allows to do without digging when replacing cables in the tubingline, which is a significant savings in repair and restoration works, and saves time
* Increase the reliability of cable networks, improved maintenance, simplifying the possibility of repair, and replacement of communications;
* Economical in price and durability in operation

Where to use protective double-walled PEX/ LDPE cable

Crosslink polyethylene – (PEX) plastic white, thermoplastic polymer of vinyl chloride. It features chemical resistance to alkalis, mineral oils, many acids and solvents. Off the air, but has a low resistance to freezing (-15 ° C). Thermal resistance – +65 ° C. Under normal circumstances, PEX tubing are sustainable, however, utilization of PEX involves a number of problems, one of which is the allocation of highly chlorinated compounds by burning it. In the production of tubing and fittings, apart from polyvinyl chloride, often used vinyls – unplasticized PEX. He has improved operational characteristics, can be a bit cheaper, and at the same time, compliance with the essential requirements for PEX tubing.
PEX tubing are widely used today in many areas of human activity. These tubes have properties typical for this polymer: reduced flammability and increased chemical resistance. In addition, they are less sensitive to UV radiation and have higher performance.
Another distinguishing feature – a high throughput. Inside these tubes almost smooth, so almost no resistance to movement of fluid through the tubing and prevents the formation of various deposits on the walls, do not corrode and have a high plasticity. In the operation of metal or concrete tubing are formed deposits on the walls, PEX tubing will not have this drawback, besides saving bandwidth guarantees safety for human health.

PEX tubing

Another advantage of PEX tubing – ease of installation, which is sufficient for very simple lever mechanical equipment. For comparison – for secure connections PEX tubing should be quite expensive special welding equipment and highly skilled installers. tubing made of PEX, easy to cut and bend, which ensures their high mobility and the possibility to arrange the most complex system configurations. Nevertheless, the simplicity and low cost structure does not preclude their reliability and durability.
In PEX tubing and is notable shortcomings. At negative temperatures their performance deteriorated greatly reduces the viscosity of the material. By a similar problem leads and the presence of scratches or cuts on the tube – in this case is sharply reduced impact strength of tubing, so if you need to connect PEX tubing with a metal does not recommend the use of threads. Accordingly, increasing labor costs and the cost of connecting tubing of different material.
Also, PEX softens at elevated temperatures, so temperature and operating conditions of tubinglines made of this material significantly limited from above (usually up to 60 degrees Celsius), although in some cases, allowed short-term excess of this limit.
Despite the limitations, PEX tubing are widely used for Plumbing and drainage systems, as well as for systems of plumbing, including drinking. Additional factors influencing the widespread use of tubing of this type have become low cost of manufacture and installation, and ease of connection. PEX tubing does not require expensive welding equipment, which reduces the requirements for the qualification of people to produce the assembly. This is a very important advantage of PEX tubing to plastic.
The main way to connect a stitch, while the connection is completely sealed. The strength of this connection is not inferior to the strength of the weld on metal tubing, so these tubinglines can be used, including pressurized plumbing. In many cases, the PEX tubing are preferred, since the conditions of the tubingline, which was built based on them are equal to or close to normal (for example, when constructing internal drainage), and then the main factor influencing the choice is their cheapness and ease of handling .

Our company offers to buy PEX tubing and fittings leading international and domestic manufacturers at reasonable prices.

PEX tubing – this is one of the useful inventions, which has brought humanity XX century. In place of cumbersome, impractical and quite expensive at the price of metal tubing came plastic.

Giving preference to these products, you’ll forget what the wear tubing or rusty water faucet. PEX tubing, sold by our company are used to address issues of plumbing, plumbingage and gas. They have several advantages compared with conventional counterparts. PEX tubing can easily compete with the heavy and expensive metal, reinforced concrete, cast-iron tubing and in their performance characteristics in many respects surpass them.

Implemented by our products more practical, such as PEX tubing and PEX tubing (tubing PE and PEX). For example, HDPE and PEX have a term of a guaranteed lifetime of 50 years. Plumbing tubing and fittings provide perfect tightness through the use of socket connections, which is ensured through the use of rubber sealing rings. Because of its light weight, reduce labor costs in carrying out construction works.

The company specializes “Stroygroup-1″ – is not only sales of PEX tubing, the company also carries out the tubing fittings, valves, non-standard parts, we assist in the design of objects, provide supervision of our products.

All products are fully consistent with Canadian standards, certified quality management system.